Home › Tools › Distance Between Two Addresses

Free map tool

Distance Between Two Addresses

Enter two places to get the straight-line distance in miles, km and nautical miles, plus the bearing.

Tip: a city works if you add the state, e.g. "Dayton, OH". Street addresses match best.

Straight-line distance, explained

The distance shown is the great-circle distance: the length of the shortest path between two points on the surface of the Earth. It is what pilots and sailors mean by distance, and what people mean by "as the crow flies". We calculate it with the haversine formula, which treats the Earth as a sphere with a mean radius of 6,371 km.

The Earth is slightly flattened at the poles, so a sphere is a simplification. The error it introduces is at most about half a percent, which is well under a mile for any trip within the US and far smaller than the uncertainty in where an address is placed.

Straight-line vs driving distance

This tool does not calculate routes. Roads detour around water, hills, private land and grid layouts, so driving distance is almost always longer. How much longer depends on the terrain:

SituationTypical road distance vs straight line
City street gridAround 20 to 40 percent longer
Interstate between distant citiesOften 10 to 25 percent longer
Across a bay, lake or mountain rangeCan be several times longer

Straight-line distance is still the right measure for many purposes: radius-based rules, mileage eligibility, flight distance, and "within X miles" clauses that specify a straight-line measurement.

Units

  • Miles: statute miles, 1,609.344 meters.
  • Kilometers: 1,000 meters.
  • Nautical miles: 1,852 meters, used at sea and in aviation.

The bearing

The card also shows the initial bearing from the first place to the second, in degrees clockwise from true north (0° is north, 90° east, 180° south, 270° west). On a great circle the heading changes along the way, so on long trips the bearing at the start is not the bearing at the end. From New York, the shortest path to Los Angeles starts out heading slightly north of due west, about 274°, and arrives heading west-southwest, about 246°. To check which way you are facing right now, use the online compass.

Where accuracy really comes from

Each address is first turned into coordinates. Interpolated addresses can land tens of meters from the building, and city names resolve to a central point that may be miles from where you mean. For precise results, use full street addresses or exact coordinates. To meet someone between two places, the halfway point tool finds the midpoint on the same line.

Questions

How do I find the distance between two addresses?

Type both addresses in the boxes above, or use GPS for your current location. The tool draws the straight line between them and shows the distance in miles, kilometers and nautical miles.

What does as the crow flies mean?

It means the straight-line distance between two points, ignoring roads, terrain and obstacles. It is the shortest possible distance over the Earth's surface.

Does this tool show driving distance?

No. It measures straight-line distance only. For driving distance and time, use a navigation app; expect the road distance to be longer, often by 20 to 40 percent.

How accurate is the straight-line distance?

The formula is accurate to within about half a percent anywhere on Earth. Most error comes from where each address is placed: geocoded addresses can sit tens of meters from the actual building.

What is the bearing?

The initial compass direction you would set off in from the first place to travel the shortest path to the second, measured in degrees clockwise from true north.

What is a nautical mile?

A unit used at sea and in aviation, defined as exactly 1,852 meters, about 1.15 statute miles. It is roughly one minute of latitude.

Boundaries: US Census Bureau TIGER/Line 2026 and cartographic boundary files. Time zones: timezone-boundary-builder 2026f (© OpenStreetMap contributors, ODbL). Elevation: AWS Terrain Tiles (USGS 3DEP, SRTM). Last checked 2026-11-18. How it works · Sources